CD DJ Coffins hold two tabletop CD players and one mixer. These ATA Rolling Consoles feature rugged built-in wheels, heavy duty spring loaded latches, stackable ball corners, and front access panels. Cabling is clean and easy through convenient access ports throughout. The FZ10CDIW mixer well holds mixers with a width from 8.75" to 10.25", depth up to 14" and 3.25" tall. The CD wells can hold a variety of players including the following: American Audio CDI-300 American Audio CDI-500 Gemini CDJ-01 Gemini CDJ-02 Gemini CFX-20 Gemini ICDJ Gemini ICFX Numark Axis-4 Numark Axis-9 Numark ICDX Pioneer CDJ-200 Stanton S-250 Vestax CDX-05 Dimensions (exterior): Width: 34.5" Height: 9" Depth: 19" Shipping Dimensions (exterior): Width: 36" Height: 10" Depth: 20" Product Weight: 37 lbs
Click here to buy
More info: Odyssey Coffin Case -1 10In Mixer -2 Med CD Plyr
HOSA DOC106 DIRECT OUT CABLE - 6-INCH Direct Out Cable: 1/4″ TRS Male to 1/4″ TS Female Stage mixers are great for live venues, but when you need separate direct outs from each channel (for sending out to a multi-track recorder, for example), you’re usually out of luck. But now, using our new DOC-106 Direct Out Cable, you can actually trick the stage mixer’s channel insert jack into thinking it’s a direct output! Ordinarily, the insert jack “steals” the individual channels signal for outboard processing. But the DOC-106’s clever wiring provides a direct output while allowing signal to continue through the console too. Works on any mixer that has conventionally wired insert jacks (Tip = Send, Ring = Return).
Click here to buy
More info: 6 in Direct-Out Cable for Send/Return Jacks
This input fader is designed specifically from Vestax for the PCV-150 Mixer.
Click here to buy
More info: Vestax Input Fader For Pcv-150 Mixer
The best vibe going, the RRDJ12W is the final word in protection for your gear. Built to take abuse, the RRDJ12W is designed to hold two battle positioned turntables and the Pioneer DJM500, DJM600 or other 12 mixer between them. Built with brains the RRDJ12W accommodates various turntables and features smart design elements like our unique removable front panel for easy access to your mixer controls, a rear access cable port for no hassle connections, low profile wheels for sleek, stealth mobility and adjustable modular foam lining so that you can create the prefect custom fit for your gear. Go ahead get your groove on! Size: 9.6″ h X 48.4″ w X 21.5″ d (centimeters: 24.38 h X 122.94 w X 54.61 d ) Weight: 44.7 lbs. (20.28 kg.)
Click here to buy
More info: Road Ready RRDJ12W Turntables/12 In Mixer W/Wheels
AMERICAN AUDIO MOBILE 310 CD Package System includes: 1x DCD-PRO310 Dual CD Player 1x Q-2411 Mixer 1x TLC 8×4 Road case 1x DJ Headphones 1x DJ Microphone All component cables needed
Click here to buy
More info: American Audio Mobile-310 Dual CD Package +
This Glide Style Coffin holds two turntables in battle position, one mixer and a laptop. It has a convenient compartment specially designed to house a Serato interface built right into the gliding laptop platform. Other features include rugged built-in wheels, heavy duty spring loaded latches, stackable ball corners, and front access panels. Cabling is clean and easy through convenient access ports throughout. Mixer well holds mixers with a width of 12.25 “, depth up to 14″ and 3″ tall. The gliding laptop platform can be positioned as needed. For the safety of your equipment, please be aware that the platform can be removed when slid out to it’s furthest point. Odyssey does not recommend storing your laptop inside the case. Note: PLEASE DO NOT TRANSPORT YOUR LAPTOP IN THIS CASE. DAMAGE MAY OCCUR. Size: 48″w x 12.75″h x 22″d Product Weight: 58 lbs
Click here to buy
More info: Odyssey FZGSBM12W Glide Laptop Coffin-12In Mixer
This is the replacement crossfader Monitor Fader for all current model & discontinued Vestax PMC-05, PMC-06 & PMC-07 Series DJ mixers. This is the fader on your mixer marked as C.F. Monitor.
Click here to buy
More info: Vestax V012011200 Headphone Crossfader
Elevate your laptop and pro audio gear in style with our new heavy-duty L-EVATION stands. LCDJSP is made to hold a Pioneer CDJ1000 player. Easy to assemble and customize with its adjustable height and strong robotic-like support arm. Have it set-up over your turntable, mixer, and other gears, giving you that extra cutting edge in your mixes with easy access to your mounted gear. Features: Top plate dimensions: 12.75″W x 3.5″H x 14.5″D Pole height: 16″ Bottom plate: 17.75″W x 18″D Top plate with extension & pole depth: 22″
Click here to buy
More info: Odyssey LCDJSP Laptop/Cd Player Stand
AURALEX MoPads Set of 4 pads (2 per speaker) Your loudspeakers are the most critical components you use to verify the quality of your work. No matter how good your mixer, mics, preamps, cables, and other pieces of gear that you’ve invested in, you’re not truly hearing what your recordings sound like until you isolate your monitors from their environment. This is where the Auralex MoPADs come in. MoPAD Monitor Isolation Pads provide sonic isolation between your monitors and whatever your monitors are resting on, INSTANTLY improving the accuracy of your entire monitoring system. MoPADs are affordable, easy to implement and really effective at decoupling your monitors from your room and all its contents. You’ve gotta get some! Until you do, you’ll never know what your recordings really sound like. Dimensions: 12″ long x 4″ wide; Weight Limitations: 100lbs.
Click here to buy
More info: Auralex MO-PAD Studio Monitor Issolation Pads (4 +
Definitive protection for your gear the RRDJCDX10W is a real heavy hitter. Built to take on the streets, the RRDJCDX10W is designed to hold two Numark CDX or HDX turntables and a 10″ mixer. The RRDJCDX10W is built smart with Rugged Road Ready features like low profile wheels for sleek, stealth mobility, smart front access panels for easy access, and a rear cable port for hassle free connections. Go ahead give it a pounding. Size: Inches - 9.4″ h X 22.6″ w X 45″ d (Centimeters - 23.88 h X 57.4 w X 114.3 d) Weight: 61 lbs. (27.67 kg.)
Click here to buy
More info: Road Ready RRDJCDX10W Coffin For HDX CDX & 10″ Mxr
American Audio Replacement Crossfader For the QD-5 mixer.
Click here to buy
More info: American Audio Replacement Crossfader For QD5
The InnoFader uses variable capacitor technology which, unlike current optical technology, makes it 100% resistant to smoke, dust, and moisture that plague most DJ working environments. In addition, currently used magnetic faders only work in the same brand mixers, leaving DJs limited options for upgrading their mixer faders. The InnoFader is designed to work with mixers from a variety of manufacturers. To ensure better compatibility over a wide range of mixers, the InnoFader comes with added features including: 1. A cut-in adjustment that allows DJs to fit the fader into a mixer with a smaller slot, while tweaking the dead space at both ends of the fader. 2. A curve adjustment which permits DJs to either match the original mixer fader curve, or create a custom curve for sharper or softer cut-in. Both adjustments are electronic, eliminating the need to tamper with sensitive mechanical fader parts. The key points of the InnoFader are as follows: No bleed/cracking Even the best conductive plastic (CP) or carbonized conductive plastic (CCP) contact faders will eventually bleed and require cleaning. Since the InnoFader is non-contact, no cleaning is required. Sturdy design - 8mm stem, long body type Many DJs have experienced issues with bent or broken 4mm fader stems, thus the InnoFader adopts the emerging standard 8mm stem, ensuring almost no chance of breaking the stem. The long body type ensure a rigid construction which when combined with the heavy stem ensures a solid and long lasting crossfader. No calibration required The InnoFader is designed to automatically compensate for circuit tolerances to the point that no calibration is required to adjust for the <0.5mm tolerance on fader cut-in position. Standard VCA output Many manufacturers design their faders to work with custom outputs, and interfaces that make plug and play with 3rd party faders almost impossible. The InnoFader will work as a drop in replacement for analog faders. Why? 1. The pinout is a 4 pin industry standard +Vin, VCA out #1, VCA out #2, and ground. 2. The VCA out signals are from 50k digital potentiometers with 256 taps, and the output can short to Vcc or ground for a full on/off signal. 3. The entire fader power draw can be as low as 0.5mA so that circuits designed for low power 50k fader connections will work. Ultra wide range tension adjustment At the lightest setting, the InnoFader can move with the slightest tap. On the other extreme, the InnoFader requires a steady push to move it. DJs can adjust the InnoFader to any tension setting depending on mixing style. Adjustable curve Analog VCA faders have fixed A, B, or D-type curves. The InnoFader has an output curve adjustment to fit any of these configurations. In addition to fitting these configurations, the InnoFader can be set for full cutting at the top or bottom. Single cut-in adjustment for both sides This ensures that the InnoFader can work in any sized fader slot. Since the adjustme
Click here to buy
More info: Audio Innovate Innofader Custom VCA Crossfader
The DJiO is compact and rugged enough to live in your gig bag, but powerful enough to provide solutions for a wide range of computer audio needs. The DJiO gives software?based DJs, performers and producers a range of options for outputting their final audio. Whether in the form of a live mix or a just?completed new track. With the DJiO, DJs and Producers can pass audio from their software?based application of choice through the USB 2.0 connector on the DJiO to a traditional mixer (for multi?channel mixing) using the built-in pair of stereo RCA connections. In addition, the DJiO features " Microphone input and pass?through to Stereo RCA jacks for quick and easy voiceovers. The DJiO features ultra?low latency audio (via ASIO drivers), with 2 independent RCA stereo outputs, a mic input with adjustable gain on stereo pair #1 and a 1/4? stereo headphone output on stereo pair #2. The DJiO is USB bus powered but can also operate with a 9V DC external power supply (sold separately) for those who have exceeded the power output of their existing USB bus. Features: USB 2.0 (single channel operation in USB 1.1) Ultra low latency 2 independent RCA stereo outputs Microphone input with adjustable gain mixed to stereo pair #1 1/4? Stereo headphone output on stereo pair #2 24?bit audio, 44.1kHz and 88.2kHz sample rates ASIO drivers with control panel USB bus?powered (optional +9 VDC external power supply sold separately) Windows and MAC compatible
Click here to buy
More info: Numark DJI-O Multi-Channel Sudio Interface Box
ROAD READY RRDJWS4V Audio/Video Rack Case: Move Your Valuable A/V Gear With Confidence The Road Ready Audio/Video Rack is ideal for protecting all your A/V gear. This clever case is built smart just like all Road Ready DJ workstations but features heavy-duty Velcro-attached nylon panels instead of the traditional hard ATA style covers. Forged out of rugged materials and ready to work, this 3-level design includes a 3 unit vertical rack on top for your triple-screen video monitor, a slanted mid-level rack to accommodate your mixer, plus a bottom rack for your DVD drives and controller. And to seal the deal there’s a unique rear hinged door for easy connections. Economy you can live with. What more could you want? Features: Beefy stackable ball corners Double anchor industrial rivets Recessed industrial grade latches Recessed industrial grade handles Industrial grade rubber feet Premium 3/8" vinyl laminated plywood Tongue and groove locking fit Rear hinged access door Heavy duty velcro-attached nylon cover Heavy duty rack rails Mounting hardware included
Click here to buy
More info: Road Ready RRDJWS4V DJ Workstation With Soft Cover
ODYSSEY FR12CDJW ATA CD PLAYER COFFIN Odyssey’s universal flite-ready case is designed to hold a 12 inch mixer and most front-load CD players. Features: Fits most front-load CD players and a 12 mixer Removable lid Stackable ball corners Fully foam-lined Includes wheels Slide-out entry panels Size: 45″ x 14″ x 9.75″ Weight: 45 lbs
Click here to buy
More info: Odysssey Coffin (2)Large CD Player (1)12In Mxr ATA
STANTON FINAL SCRATCH CD: Adaptor Kit If you prefer CDs to vinyl, than the FS CD Adaptor Kit has your name on it. Now you can use Stanton’s acclaimed Final Scratch system with your existing CD rig. Using your Final Scratch system you can control digital files with your CD players, instead of turntables. Simply store the files on your computer’s hard drive and manipulate them using the specially time-coded Final Scratch discs. These discs do not contain music, but rather digital time code which will track digital music files. Scratch, tweak, chirp your discs to gain realtime control of the music with no audible delay. Use all your favorite CD functions including scratching, seamless looping and hot starts. Features: FS CD Amp to connect your CD player to the Final Scratch amp Two FS Discs containing 22 minutes of FS time-code Use a CD player as a controller to manipulate audio files on your computer Use your favorite CD functions like scratching, seamless loop and hot start Works with FS version 1.0 and 1.1 Add to any standard DJ set-up (mixer and 2 CD players)
Click here to buy
More info: Stanton FSCD Final Scratch CD Adapter Kit
PIONEER REPLACEMENT FADER KNOB FOR DJM600 S-O This is a genuine Pioneer replacement for the fader knob on your DJM-600 mixer.
Click here to buy
More info: Pioneer Replacement Fader Knob For DJM600
GATOR GR6L ATA 6-SPACE RACK WITH LOCKINGCOVERS Features: Pop-up ratchet system for transporting mixer flat then elevating to various angles Compact size allows for smaller transportation area requirements High density polyethylene cabinet construction Spring loaded twist latches Chrome plated corners for extra protection Features pull-out handle & recessed wheels Recessed spring loaded handles Threaded rack rails Padded wrist rest for comfort Size: 13.5″ x 22″ x 22.375″ Weight: 14 lbs
Click here to buy
More info: Gator GR6L ATA 6-Space Rack With Lockingcovers
American Audio Replacement Crossfader For the DX-4 mixer.
Click here to buy
More info: American Audio Replacement Crossfader For DX4
ACE KEB2034 LARGE DJ GEAR BAG Features: Size: 20? x 19? x 6? Great for digital recorders, mixer, groove boxes, & MIDI workstations Lid has side flaps for weather protection Extra large front pocket, two side pockets, master compartment sized for electronic gear, & a smaller compartment for accessories Padded shoulder strap Protective rubber bottom
Click here to buy
More info: ACE KEB2034 Large DJ Gear Bag
ROAD READY ATA FLIGHT BATTLE CASE W/WHEELS The best vibe going, the RRDJ10W is the final word inprotection for your gear. Built to take abuse, the RRDJ10W is designed to hold two battle positioned turntables and a 10? mixerbetween them. Built with brains the RRDJ10W accommodates various turntables andfeatures smart design elements like our unique removable front panel for easyaccess to your mixer controls, a rear access cable port for no hassleconnections, low profile wheels for sleek, stealth mobility and adjustablemodular foam lining so that you can create the prefect custom fit for your gear.Go ahead get your groove on!. Features: Beefy, Stackable Ball Corners Double Anchor Industrial Rivets Recessed, Industrial Grade Latches Recessed Industrial Grade Handle Industrial Grade Rubber Feet Premium 3/8? Vinyl Laminated Plywood Tongue and Groove Locking Fit Front Access Panels Rear Access Cable Port Low Profile Wheels ATA 300 Rating Road Ready Limited Life Time Warranty
Click here to buy
More info: Road Ready RRDJ10W Turntables/10 In Mixer W/Wheels
GATOR GR2L ATA 2-SPACE RACK WITH LOCKINGCOVERS Features: Pop-up ratchet system for transporting mixer flat then elevating to various angles Compact size allows for smaller transportation area requirements High density polyethylene cabinet construction Spring loaded twist latches Chrome plated corners for extra protection Features pull-out handle & recessed wheels Recessed spring loaded handles Threaded rack rails Padded wrist rest for comfort Size: 6.5″ x 22″ x 22.375″ Weight: 10 lbs
Click here to buy
More info: Gator GR2L ATA 2-Space Rack With Lockingcovers
TASCAM 3R009580 CROSSFADER FOR X15 OR X17 Replacement crossfader for the TASCAM X15 or X17 mixer.
Click here to buy
More info: Tascam 3R009580 Crossfader For X15 Or X17
RANE 08752 DUAL SLIDE FADER FOR MM8 MIXE Rane 08752 Dual Slide Fader For the MM8 Mixer.
Click here to buy
More info: Rane 8752 Dual Slide Fader For Mm8 Mixer
Odysseys carpeted Pro console holds two Denon DN-S5000 CD players, and one 19? mixer. The front flip-down panels allow easy CD loading slot access. The players are held snuggly in place by interior foam padding, and the lid is detachable. Exterior hardware includes recessed latches and handles. Features: Size: 59″W x 8.5″H x 16.5″D Weight: 45 lbs
Click here to buy
More info: Odyssey Carpeted Coffin 19 Mxr DNS S5000
ROAD READY COFFIN CASE FOR TECHNICS 2-SLDZ1200 & SHMZ1200 Definitive protection for your gear, the RRDJDZMZW is areal heavy hitter. Built to take on the streets and designed to hold twoTechnics SL-DZ1200 CD players along with a SH-MZ1200 mixer. The RRDJDZMZW isbuilt smart with Rugged Road Ready features like 3 smart front access panels for easy CD and mixer access, and a rear accesscable port for hassle free connections. We even threw in our low profile wheelsfor sleek stealth mobility. Go ahead give it a pounding. Features: Beefy, Stackable Ball Corners Double Anchor Industrial Rivets Recessed, Industrial Grade Latches Recessed Industrial Grade Handle Industrial Grade Rubber Feet Premium 3/8? Vinyl Laminated Plywood Tongue and Groove Locking Fit Front Access Panels Rear Access Cable Por Low Profile Wheels ATA 300 Rating Road Ready Limited Life Time Warranty
Click here to buy
More info: Road Ready Coffin Case For 2-Sldz1200 & Shmz1200
The Crown? PCC?-160 (Phase CoherentCardioid?) is a surface-mounted halfsupercardioidmicrophone intended forprofessional applications on stage fl oors, lecterns,conference tables, and news desks?whereverimproved gain-before-feedback and articulationare important. Features: Industry-standard stage floor microphone Phase Coherent Cardioid design prevents coloration from surface sound reflections High output overrides mixer input noise Half-supercardioid polar pattern rejects the pit orchestra and offers high gain-before feedback Very rugged Low profile
Click here to buy
More info: Crown PCC160 Unidirectional Boundary Mic
GIG SKINZ Mixer/Utility Bag: Travel In Style & With Confidence - LARGE You?ll always know your gear is safe and sound in a Gig Skinz bag. These special utility bags are designed for small to medium-sized mixers, drum machines and any other delicate gear that you take from show to show. Each has a main compartment and two accessories pockets. The bags not only looks great but truly offers exceptional protection for your valuables. This one is the large size. Feature: Rugged, large travel bag that holds your mixer, drum machine or small recorder in main compartment; accessories in outer pockets Shoulder strap and handle for easy carrying High tech water-resistant carbon fiber style material High density foam body with structured semi-hard lining Maintains shape Plush ?fur? lined interior Heavy duty ?grip-dimple? bottom lining Size: 17.5"w x 16.75"d x 5.5"h.
Click here to buy
More info: Gig Skinz GSMIXL Mixer/Utility Bag - Large
ODYSSEY COFFIN FOR TWO DZ-1200s AND YOUR MIXER Take your digital show on the road with confidence. This solid coffin case is designed specifically for a pair of Technics SL-DZ1200 CD/MP3 players and your 12" Technics mixer. It’s fully foam lined and the interior will fit your SL-DZ1200s like a glove. Check out the seriously durable hardware including steel ball corners, recessed latches and removable front panels for easy access to the CD trays and SD media cards. Features: Heavy duty laminate flight case, coffin style Designed specifically for two Technics SL-DZ1200s and a 12" mixer Foam lined for a perfect fit Recessed hardware Removable panel for easy access to the CD trays and SD media cards Stackable ball corners
Click here to buy
More info: Odyssey Coffin For Sldz1200 And Mixer
PIONEER DJC3000RV ROTARY KNOB FOR DJM3000 MIXER This is a genuine Pioneer replacement for the rotary knobs on your DJM-3000 mixer.
Click here to buy
More info: Pioneer DJC3000RV Rotary Knob For DJM3000 Mixer
ODYSSEY CBM10E ECONOMY TURNTABLE COFFIN-BATTLE Made to house two turntables in battle position, and one 10″ mixer. Features fully-foamed turntable wells. Features: Size: 47″W x 7.5″H x 21.5″D Weight: 42 lbs
Click here to buy
More info: ODYSSEY CBM10E ECONOMY TURNTABLE COFFIN-BATTLE
Unlock the full potential of TRAKTOR 3 in this clear and easy-to-understand video tutorial, featuring extensive demonstration clips and detailed commentary from world-renowned artists and TRAKTOR specialists. The Native Instruments TRAKTOR 3 Tutorial DVD is the complete guide to the world’s leading DJ software, produced by DJs, for DJs. Expert Input With over 4 hours of material, this insightful tutorial demonstrates TRAKTOR3`s incredible features in the context of real-world DJing. Top flight DJs Chris Liebing, and Kabuki appear regularly and provide demonstrations of their individual uses of the software. The DVD also features high quality live footage from a number of high profile TRAKTOR DJs. In-depth Knowledge Over eight chapters this tutorial covers all aspects of the TRAKTOR 3 environment, aimed firmly at getting you inspired and mixing straightaway. Start by mastering the decks and mixer, then discover the secrets of using loops and effects to add dynamics to your sets. Get acquainted with TRAKTOR 3’s highly flexible MIDI features, Beat Grids and advanced mixing techniques, before delving into external controllers and the world of playing live. A collection of Tutorial DVD Tracks is provided ensuring a fun and transparent learning process that delivers fast results. Table of Contents: Intro 1 Exploring The Decks 2 The Mixer 3 Preparing Loops / Looping On The Fly 4 Integrating Effects & Tempo Synching 5 MIDI Implementation & Controllers 6 Working With Beat Grids 7 Advanced Mixing Techniques 8 Performing Live With TRAKTOR Live Footage Extras As always, the DVD features the popular Interactive Interface as seen on the previous Native Instruments DVD Rom releases. A bundled selection of varied mix material supports the learning process, allowing you to closely follow the techniques being demonstrated and guaranteeing an intimate understanding of how TRAKTOR 3 can enhance your individual DJ set. The Essential Guide to your Playlists; a comprehensive PDF guide, written specifically for this Tutorial, containing all you need to know in order to organize and tag the music on your computer for optimal use with TRAKTOR 3.
Click here to buy
More info: NI TRAKTOR-DVD Tutorial DVD for Traktor Software
ROAD READY RRM10U SLANT TOP RACK CASE 10X10 SPACES Good construction doesn?t go out of style. Designed witha 10U slanted top rack for convenient mixer/CD controller placement and a 10U vertical rack for amp or effect units, the RRM10U is built right. TheRRM10U features an 18? mountablerack depth and 2 heavy-duty removable covers.To make a good thing even better it includes a unique removable, rear hingeddoor for easy access to your gear. At last, connections without a hassle. Features: Beefy, Stackable Ball Corners Double Anchor Industrial Rivets Recessed, Industrial Grade Latches Recessed, Spring Loaded Handles Industrial Grade Rubber Feet Premium 3/8? Vinyl Laminated Plywood Tongue and Groove Locking Fit Heavy Duty Rack Rails Hinged Rear Door Mounting Hardware Included ATA 300 Rating Road Ready Limited Life Time Warranty
Click here to buy
More info: Road Ready RRM10U Slant Rack Case 10X10 Spaces *
Gigskinz Medium Mixer Bag with Laptop Compartment Designed just like the GSMIXM bag but features a hidden laptop compartment in the back (fits notebooks up to 17″) Features: High Tech Water Resistant Carbon Fiber Style Fabric High Density Foam Body w/ Structured Semi-Hard Lining That Maintains Shape and Protects Gear From Impact Separate Zipped Computer Compartment in Back for laptop Plush Fur Lined Interior and Pockets for Added Cushioning and Protection Heavy Duty, Grip-Dimple Bottom Lining Molded High Tech Lockable Rubber Zipper Pulls and Handles
Click here to buy
More info: Gigskinz Medium Mixer/Utility Bag
ODYSSEY FR10CDJW ATA CD PLAYER COFFIN Odyssey’s universal flite-ready case is designed to hold a 10 inch mixer and most front-load CD players. Features: Fits most front-load CD players and a 10 mixer Removable lid Stackable ball corners Fully foam-lined Includes wheels Slide-out entry panels
Click here to buy
More info: Odyssey Coffin (2)Lg CD Players (1)10In Mxr ATA
GATOR GR8L ATA 8-SPACE RACK WITH LOCKINGCOVERS Features: Pop-up ratchet system for transporting mixer flat then elevating to various angles Compact size allows for smaller transportation area requirements High density polyethylene cabinet construction Spring loaded twist latches Chrome plated corners for extra protection Features pull-out handle & recessed wheels Recessed spring loaded handles Threaded rack rails Padded wrist rest for comfort Size: 17″ x 22″ x 22.375″ Weight: 17 lbs
Click here to buy
More info: Gator GR8L ATA 8-Space Rack With Lockingcovers
ODYSSEY FRDNX31000 COFFIN CASE DNS1000/DNX1000 The FRNDX31000 holds two Denon DNS1000 players and one DNX300 mixer or DNX100 mixer. This case features slide-out panels for CD bay and mixer control access. Heavy-duty steel ball corners, recessed handles and latches. Detachable lid included. Specifications: Size: 34 x 18.5 x 9 Weight: 24 lbs
Click here to buy
More info: Odyssey Coffin 4 -2 DNS1000 & -1 DNX300 ATA Style
PIONEER VIDEO SWITCHER FOR DVJX1 & DJM MIXERS This VSW-1 is Pioneer’s own mixer for the DVJX-1. It is simple in its design and extremely easy to use, ensuring that DVJs are able to mix audio/video content from separate sources without relying upon multiple independent devices or needing another artist in the DVJ booth. This Video Switcher gives performers more freedom in the mix because they can automatically switch video sources (by pressing the red “Auto” button) when using the familiar Fader Start capability found in all of Pioneer’s Pro DJ mixers.
Click here to buy
More info: Pioneer VIDEO Switcher For Dvjx1 & DJM Mixers
GATOR 12 SPACE DELUXE POLYETHYLENE 19″ RACK Features: Pop-up ratchet system for transporting mixer flat then elevating to various angles Compact size allows for smaller transportation area requirements High density polyethylene cabinet construction Spring loaded twist latches Chrome plated corners for extra protection Features pull-out handle & recessed wheels Recessed spring loaded handles Threaded rack rails Padded wrist rest for comfort Size: 17.5″ x 21.5″ x 9.5″ Weight: 16.25 lbs
Click here to buy
More info: Gator 12 Space Deluxe Polyethylene 19 Rack
RANE REPLACEMENT CROSSFADER FOR EMPATH MIXER - PENNY & GILES Penny & Giles Faders are the most respected, highest quality analog faders available. Features: Very high performance, long life and low maintenance Excellent Feel Rated for 2 million cycles Allows any fader response from SLOW smooth fade to FAST cut CONTOUR control provided for the Crossfader Allows any response from SLOW smooth blend to FAST cut
Click here to buy
More info: Rane Replacement Single For Empath Mixer
