Adapter RCA (F) to 1/4 (M) Mono (2-Pk)
Cable Adapter: Changes an RCA connector into a 1/4″ plug. Package of 2.
More info: Adapter RCA (F) to 1/4 (M) Mono (2-Pk)
Mono Related Items
Y-Cable RCA (F) to Dual RCA (M)
6 IN Y CABLE-FEMALE RCA TO 2 MALE RCA This 6 inch Y connector cable goes from an RCA Female connector to Two Mono RCA Male connectors.
More info: Y-Cable RCA (F) to Dual RCA (M)
3 Ft 1/8 Stereo (M) to Left and Right 1/4 (M)
HOSA 3 FT STER(M) TO 2 MONO 1/4 INCH PHN CABLE The CMP-153 splits a Stereo Mini (1/8″) signal into two momo Left and Right 1/4″ connectors. 3 feet.
Headphone Adapter 1/4 Mono (F) to 1/8 Mono (M)
1/4 IN FEM PHONE JACK TO 1/8 IN MALE JACK Converts 1/4″ Stereo headphone plug to a Stereo 3.5mm male
Rapco Adapter - Mono 1/4-Inch Right Angle
Right Angle 1/4″ Plug Adapter - Mono Mono 1/4″ right angle plug. For use with instruments and patch cables. Not compatible with stereo signals like for headphones.
More info: Rapco Adapter - Mono 1/4-Inch Right Angle
Dod Stereo 2 Way Mono 3 Way Crossover
DOD SR-835 Variable Stereo Crossover High quality stereo 2-way or mono 3-way crossover with simple, cost effective driver protection. Features: Accurate state-variable, 18dB/octave Butterworth filters to prevent peaks or dips in the output at crossover points Variable summed bass output for mono subwoofer systems Inputs are 1/4″ TRS balanced/unbalanced, outputs are 1/4″ TRS balanced and 1/4″ TRS unbalanced jacks
More info: Dod Stereo 2 Way Mono 3 Way Crossover
Monster MCLMST2MF 1/4″ St M to (2) 1/4″ mono F
Monster CableLinks adapters and couplers are different from ordinary adapters because Monster uses high-performance Monster Cable inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection.
10 Ft 1/8 Stereo (M) to Left and Right 1/4 (M)
STEREO 3.5MM TO TWO MONO 1/4IN PHON 10 FT The CMP-153 splits a Stereo Mini (1/8″) signal into two momo Left and Right 1/4″ connectors. 10 feet.
5 Ft Single XLR (F) to 1/4 (M) Unbalanced
HOSA 5 FT XLR(F) TO MONO 1/4 INCH PHN CABLE Features Heavy-Duty cabling. These unbalanced cables are wired PIN-2 to TIP, PINs 3 and 1 to SLEEVE (ground)and have an XLR female connector on one end with unbalanced 1/4″ male on the other. 5 feet.
More info: 5 Ft Single XLR (F) to 1/4 (M) Unbalanced
Monster MCLOM 1/4″ mono male to 1/4″ mono male off
Monster CableLinks adapters and couplers are different from ordinary adapters because Monster uses high-performance Monster Cable inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection.
More info: Monster MCLOM 1/4″ mono male to 1/4″ mono male off
Monster MCLFMINI 1/8″ to 1/8″ mono F inline
Monster CableLinks adapters and couplers are different from ordinary adapters because Monster uses high-performance Monster Cable inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection.
More info: Monster MCLFMINI 1/8″ to 1/8″ mono F inline
Monster MCLFMFMINI 1/4″ mono F to 1/8″ mono F
Monster CableLinks adapters and couplers are different from ordinary adapters because Monster uses high-performance Monster Cable inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection.
Y-Cable 1/4 (M) to Dual RCA (M) Mono 9.9 Ft
The CYR Series applies a monoral 1/4″ signal to two RCA, or takes two RCA (left and right) signals and combines them to a single mono 1/4″ male. 9.9 feet
More info: Y-Cable 1/4 (M) to Dual RCA (M) Mono 9.9 Ft
Y-Cable 1/4 (M) Mono to Dual RCA (M)
The CYR Series applies a monoral 1/4″ signal to two RCA, or takes two RCA (left and right) signals and combines them to a single mono 1/4″ male. 6.6 ft
More info: Y-Cable 1/4 (M) Mono to Dual RCA (M)
Monster MCLFM 1/4″ mono F to 1/4″ mono F inline
Monster CableLinks adapters and couplers are different from ordinary adapters because Monster uses high-performance Monster Cable inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection.
Monster MCLM 1/4″ to 1/4″ mono male inline coupler
Monster CableLinks adapters and couplers are different from ordinary adapters because Monster uses high-performance Monster Cable inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection.
More info: Monster MCLM 1/4″ to 1/4″ mono male inline coupler
Behringer CT-100 Cable Tester
BEHRINGER CT100 CABLE TESTER: When You Really Need To Know Something in your audio chain isn’t working and you don’t have time to guess about the “weak link.” The Behringer CT100 Cable Tester puts an end to speculation. The intelligent, CPU-controlled CT100 accepts virtually any connector type: XLR, mono and TRS phone (1/4", 1/8", TT), RCA and MIDI. It shows which input pin is connected to which output pin. Separate LEDs indicate proper shield connection and phantom power presence. The CT100 also offers an installed cable test mode and a continuity check plus a test tone generator. Features: Three modes: cable test mode, installed cable test mode and test tone mode Accepts XLR, mono and stereo TRS phone (1/4", 1/8", TT), RCA and MIDI Connectors Continuity check Intermittent detect Phantom power detect Grounded shield detect Test tone generation (1 kHz and 440 Hz) Battery operation (requires two AA alkaline batteries)
More info: Behringer CT-100 Cable Tester
Monster MCLMRFM RCA To 1/4 Mono Male
Monster? CableLinks? adapters and couplers are different from ordinary adapters because we use high-performance Monster Cable? inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection. Features: RCA Male to 1/4 St Female 24K gold contact connectors Lifetime product warranty Exclusive MonsterRugged? Construction Custom-molded super heavy-duty barrel
More info: Monster MCLMRFM RCA To 1/4 Mono Male
Monster MCLMFST 1/4 mono M to St F
Monster CableLinks adapters and couplers are different from ordinary adapters because Monster uses high-performance Monster Cable inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection.
More info: Monster MCLMFST 1/4 mono M to St F
Monster MCLMMTFM M Banana to 1/4″ Mono F
Monster CableLinks adapters and couplers are different from ordinary adapters because Monster uses high-performance Monster Cable inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection.
More info: Monster MCLMMTFM M Banana to 1/4″ Mono F
Vestax VAI-40 USB Audio Interface
VAI-40 is a powerful, yet affordable, USB audio solution for computer remix- a perfect solution for mobile live with VCI-100 USB DJ Controller. Besides standard recording and playback functionality, VAI-40 provides everything that isneeded for professional music production. In its compact case VAI-40 provides 4 analoginput(2ch stereo) and 4 analog output channels(2ch stereo) with RCA connectors and acombined stereo headphone output. With support for ASIO 2.0, CoreAudio and MME / WDM, VAI-40 is compatible to all majormusic and DJ applications like Cubase, Logic, Sonar, Reason, Reaktor, MixVibes, Traktor DJStudio, LIVE6, BPM Studio and much more. * 4 mono/2 stero input channels and 4 mono/2 sterooutput channels with RCA connectors * -10dBV input / output level (unbalanced) * Headphone output (1/4″ connector) with 60mWamplifier * ASIO 2.0 and CoreAudio support (4 inputs / 4outputs) * MME / WDM support (2 inputs / 2 outputs) * Standard USB connection to PC or Mac compatible with Windows 2000, XP and Mac OS X
More info: Vestax VAI-40 USB Audio Interface
Single Gang Wallplate with (2) 1/4 Jack (F)
CBI ONE GANG PLATE WITH TWO 1/4″ MONO JACKS This wall plate features two 1/4″ mono jacks and is made of heavy steel construction with silver finish.
More info: Single Gang Wallplate with (2) 1/4 Jack (F)
Monster MCLMSTMINI2FM 1/8″ St M to (2) 1/4″ Mono F
Monster CableLinks adapters and couplers are different from ordinary adapters because Monster uses high-performance Monster Cable inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection.
More info: Monster MCLMSTMINI2FM 1/8″ St M to (2) 1/4″ Mono F
Monster MCLFRM RCA F to 1/4″ Mono M
Monster CableLinks adapters and couplers are different from ordinary adapters because Monster uses high-performance Monster Cable inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection.
More info: Monster MCLFRM RCA F to 1/4″ Mono M
Monster MCLMSTMINIFM 1/8 ST M to 1/4 Mono FM
Monster? CableLinks? adapters and couplers are different from ordinary adapters because we use high-performance Monster Cable? inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection. Features: 1/8 St Male to 1/4 Mono Female 24K gold contact connectors Lifetime product warranty Exclusive MonsterRugged? Construction Custom-molded super heavy-duty barrel
More info: Monster MCLMSTMINIFM 1/8 ST M to 1/4 Mono FM
Monster MCLMMINIFST 1/8″ mono M to 1/4″ St F
Monster CableLinks adapters and couplers are different from ordinary adapters because Monster uses high-performance Monster Cable inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection.
More info: Monster MCLMMINIFST 1/8″ mono M to 1/4″ St F
Monster MCLMMINIFM 1/8″ mono M to 1/4″ mono F
Monster CableLinks adapters and couplers are different from ordinary adapters because Monster uses high-performance Monster Cable inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection.
Monster MCLMMINIFSTMINI 1/8 Mono M To 1/8 St FM
Monster? CableLinks? adapters and couplers are different from ordinary adapters because we use high-performance Monster Cable? inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection. Features: 1/8 Mono Male to 1/8 St Female 24K gold contact connectors Lifetime product warranty Exclusive MonsterRugged? Construction Custom-molded super heavy-duty barrel
Presonus COMP-16 Mono Preset Compressor
PRESONUS COMP-16: Easy-To-Use Compressor Many of the presets contained in the award winning BlueMax. Features: 16 preset compression curves Vocal, percussion, fretted, keyboard, limit and effect Large backlit VU meter Bypass button
More info: Presonus COMP-16 Mono Preset Compressor
Roland VS8F3 Expansion Board For Plug-In Effects
ROLAND VS8F-3 PLUG-IN EXPANSION BOARD: Add The Power Of Plug-Ins To Your VS The VS8F-3 Plug-In Expansion Board is an easy and affordable way to add powerful plug-in effect processing to your V-Studio. Each board is capable of loading two high-quality plug-ins from Roland and 3rd party developers (sold separately). To get you started, there are five Roland plug-ins included right out of the box. And the sound quality is top-notch?thanks to 56-bit internal processing and up to 96kHz sound quality. Features: Open platform card adds powerful plug-in processing to the latest V-Studios Superb sound quality: 56-bit processing and up to 96kHz sampling rate Runs two stereo (4 mono) plug-ins at 48kHz or one stereo (two mono) plug-in(s) at 96kHz Includes five Roland plug-ins (stereo reverb, tempo mapping, pre-amp modeling, mastering tool kit, vocal channel strip), plus support for optional 3rd party plug-ins Compatible with VS-2000CD/2400CD/2480 Series (VS-2400CD/2480/2480CD require a CD-ROM update included in the box) Support for the VS-1680/1880/1824 is coming very soon Install up to two plug-ins per card 3rd party developers include Antares, IK Multimedia, Universal Audio, Massenburg, McDSP and more
Monster MCLMSTFSTMINI 1/4″ St M to 1/8″ mono F
Monster CableLinks adapters and couplers are different from ordinary adapters because Monster uses high-performance Monster Cable inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection.
Monster MCLM2FM 1/4 M mono to (2) 1/4 F mono
Monster CableLinks adapters and couplers are different from ordinary adapters because Monster uses high-performance Monster Cable inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection.
More info: Monster MCLM2FM 1/4 M mono to (2) 1/4 F mono
9.9 Ft Dual RCA (M) to 1/4 Mono (M)
RCA to 1/4 Molded patch cables (imported). All economy cables are paired cables. 9.9-feet.
More info: 9.9 Ft Dual RCA (M) to 1/4 Mono (M)
Marshall MC212 2×12 Guitar Speaker Cabinet
Marshall MC212 130W 2×12 Guitar Extension Cabinet This UK-built extension cabinet is suitable for use with a full-sized guitar amp head. 2 x 12″ 130W cabinet features custom-voiced Celestion speakers, a birch ply baffle and extremely compact size. It operates in either 4 ohms mono or 8 ohms per side in stereo.
More info: Marshall MC212 2×12 Guitar Speaker Cabinet
Monster MCLMMINI2F 1/8 Mono Male To 2-RCA Female
Monster? CableLinks? adapters and couplers are different from ordinary adapters because they use high-performance Monster Cable? inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection. Features: 1/8 Mono Male to (2) RCA Female Custom-molded super heavy-duty barrel Lifetime product warranty Exclusive MonsterRugged? Construction Monster Cable? P500 instrument cable technology with molded strain relief 24K gold contact connectors
Monster MCLM2FR 1/4 mono M to (2) RCA F
Monster CableLinks adapters and couplers are different from ordinary adapters because Monster uses high-performance Monster Cable inside, plus extra shielding to keep RF and EMI noise out. That helps make your Monster CableLinks coupler or adapter the strongest link in your signal chain. Get your Monster CableLinks adapter/coupler today for the ultimate connection.
More info: Monster MCLM2FR 1/4 mono M to (2) RCA F
Line 6 Cab 412S-T 4×12 Guitar Speaker Cabinet
These 4X12 closed backs really let you open up a Vetta II HD, HD147, or Duoverb. Each cab can be used in mono, or split into stereo. And each HD can power up to eight cabs, when only a wall sound will do. Features: 4×12″ custom Celestion speakers Baltic birch construction throughout 300 Watts max, 2/8 ohm mono, 4/16 ohm stereo Removable casters 78 lbs., 29.75″W x 29.25″H x 14″D (35.5 kg, 74cm x 76cm x 36cm)
Universal Audio 1176LN Classic Limiting Amplifier
1176LN Limiting Amplifier Emulation The reputation of this analog classic is well known throughout the audio industry. Originally designed and built during the 1960’s, the 1176LN was the first to use a field effect transistor (FET) as a voltage-controlled variable resistor, and that innovation was the key to the product’s unique character. An in-depth analysis of the 1176LN’s "personality" allowed Universal Audio to methodically reproduce those results within a plug-in architecture, and now offer that same character to computer-based audio workstations. Features: Ultra-fast attack time Unique, analog-friendly, "warm" characteristics FET Gain Reduction Emulation Supports the popular "All Buttons Mode", just like the original Input & Output Gain Adjustment Knobs w/adjustable Attack and Release Settings Adjustable Program-Dependent Compression Behavior Custom Output Transformer Emulation design Mono or Stereo Operation Full automation capabilities Flexible VU metering modes Detailed, precise screen shot provides a realistic analog look and feel
More info: Universal Audio 1176LN Classic Limiting Amplifier
