Features: 2-way stereo or 3-way mono Dedicated 100Hz subwoofer output Mute switches 24 dB filters and mute switches Fully adjustable crossover frequencies and levels XLR input and output connectors Internal power supply Controls and switches Channel Gain Control: 0 to +12 dB Low Frequency Level Control: -8 to +6 dB High Frequency Level Control: -8 to +6 dB Low Frequency to High Frequency crossover: 100 Hz to 1 Khz x10 range: Changes Low Frequency to Mid Frequency from (100 Hz to 1 kHz) to (1kHz to 10 kHz) 2-way stereo/3-way mono changes the unit from 2-way stereo or 3-way mono Frequency Response: Each output is -3 dB at the selected crossover frequency value. Outputs are essentially flat within their relative passbands Distortion: Less than 0.02% THD @ +4 dBu,@ 1 kHz Hum and Noise: Crossover controls set @ 1 kHz, all level controls set at 0 dB; 22 Hz to 22 kHz, unweighted gain @ 0dB(ref +4dBu) - 90dB Low Frequency Output: -86 dBu below 80 dB High Frequency Output: -84 dBu below -78 dB Maximum Input Level: +14 dBu, (channel gain @ 0 dB input level controls set at 0 dB) +22 dBu Maximum Output Level: +22 dBu, unbalanced +28 dBu, balanced Input Impedance: 10 k ohms unbalanced Connectors: Inputs: XLR Balanced Outputs: XLR Balanced Power Requirements: 120V AC, 50/60 Hz, 20 watts (domestic model) Dimensions: 19″W x 1.75″H x 5.5″D (Unpacked) 20.25″W x 4″H x 7.25″D (Packed) Weight: 5.5 lbs. (Packed) 4 lbs. (Unpacked)
Click here to buy
More info: Peavey PV23X0 2 Way Crossover
By increasing input and output connectors, the QFO-LE-DX can easily be used with computers and DJ performance software such as Serato. Vestax focused on those who asked for mobility with this new digital media and the QFO-LE-DX delivers with new features for the digital DJ looking for the same vinyl touch of the original QFO. The QFO-LE-DX is available exclusively at PSSL and is limited to 250 units world wide! Features: Vestax DC Motor & Digital Servo - Original high torque motor as used in the PDX-2000 with great stability and reliability, and a high-grade digital servo that controls the motor with perfection. Control Layout - Dual PLAY/STOP, QUARTZ LOCK and REVERSE controls laid out on each side of the cross fader to allow DJs the choice of their scratch hands and speedy access. The layout was also designed on a concept of how many features can be controlled at one time. +/- 60% Pitch Control - A new style of pitch controlling is now possible thanks to the Spin Slide Pitch control. The pitch control slides 180 degrees with a selection of 3 control modes and a variety of linked scratch moves. It is also a very important feature when you’re creating melodies with single note records. Channel Reverse Switch - The audio assign of PGM 1 and PGM 2 can be instantly exchanged with the PGM REV switch. ASTS Tone Arm - Vestax???fs reliable original ASTS tone arm applied. The needle is prevented from skipping by keeping the inside force and outside force rate as low as possible. Shock Proof Detachable Fader - A conductive plastic PCV fader has been applied with a new shock absorbent technology called the Shock Proof method, securing supreme stability for the turntable. Fader Reverse / Curve Switch - A crossfader reverse switch is located underneath the crossfader and a 2 level crossfader curve control is set on the side panel. The input faders curve setting can be selected with the curve switch located inside the panel of the input fader unit. Monitor System - The QFO LE DX has a unique stereo system that can select from each PGM channel and MASTER sound with a 3 point lever switch. The DJ can practice scratches monitoring via headphones without sending out the main sound from master output. Connection for headphones can be selected from 1/4 inch headphone jacks and mini headphone jacks. The monitor level can be adjusted with the PHONES LEVEL knob.
Click here to buy
More info: Vestax QFO LE DX hybird Pro Turntable
QSC ISA-500T POWER AMP: Installed System Power Amp Unique distributed-sound power amplifier that can drive 8- or 4-ohm loads and a distributed system on the same channel simultaneously. Distributed systems can reduce the number of required amp channels by allowing a limited number of speakers to be attached to the same amp as is powering the main sound system. Features: 425 watts at 4 ohms (per channel) 260 watts at 8 ohms (per channel) 900 watts bridged mono at 8 ohms 25-, 70-, 100-volt, and low-impedance outputs available simultaneously Simple barrier strip connection determines output mode Rear panel gain controls for tamper resistant operation with 2-dB detents for quick and repeatable settings XLR and detachable Euro style input connectors DataPort V2 for use with DPV2-compatible signal processing accessories (XC-3, SF-3, LF-3) and DSP-3 (with external power supply) Independent defeatable clip limiters for reduced distortion Selectable high-pass filters that protect speakers and prevent speaker transformer saturation with minimal effect on program material (50 Hz or 75 Hz) Class H complementary bipolar output circuitry reduces AC power draw and waste heat by 40% (ISA 750 and 800T) Front panel indicators include power, signal, and clip Covered barrier strip output connectors for safety agency compliance Automatic variable-speed fan for quiet normal operation with maximum cooling on demand Rear-to-front air flow keeps equipment racks cool Stereo, Bridge, or Parallel operating modes Comprehensive protection circuitry including DC, infrasonic, thermal overload, and short circuit protection 3-year warranty (optional 3-year extended service contract)
Click here to buy
More info: QSC ISA500TI 70V Power Amplifier
