BEHRINGER DEQ2496: Ultra-Curve Pro High-Precision Digital 24-Bit/96kHz EQ/RTA Mastering Processor The Behringer DEQ2496 Ultra-Curve Pro is an ultra high-precision digital 24-bit/96kHz EQ/RTA mastering processor. Its extremely high audio performance makes it ideal for audiophile mastering and PA purposes. There are four concurrently selectable EQ modules (31-band graphic EQ, 10-band parametric EQ, Feedback Destroyer and three dynamic EQs per channel). Another highlight is the additional 61-band realtime analyzer that can run simultaneously with the EQ section. The DEQ2496 features high-quality AKM 24-bit/96kHz A/D and D/A converters and two high-performance 32/40-bit floating-point SHARC digital signal processors for ultimate sonic resolution and 113dB dynamic range. There are also multi-functional level meters (peak/RMS, VU and SPL meter with dBA/dBC weighting via RTA mic input) plus 64 user memories for complete setups and/or individual module configurations. You get a separate RTA mic/line input with phantom power, a professional wordclock input and MIDI connections for full remote control, preset dumps and system updates. The DEQ2496 also boasts balanced inputs and servo balanced outputs with gold-plated XLR connectors, stereo aux output, AES/EBU and S/PDIF inputs and outputs (XLR and optical). The internal switch-mode power supply assures maximum flexibility (100 - 240 V~), noise-free audio, superior transient response and lowest possible power consumption. Like all BEHRINGER products, the DEQ2496 was manufactured under ISO9000 certified management. Features: Ultra high-resolution processor for all EQ, RTA and dynamic applications, especially for PA and audiophile mastering 4 concurrently selectable EQ modules (31-band graphic EQ, 10-band parametric EQ, Feedback Destroyer plus three dynamic EQs per stereo channel) Flexible Compressor/Expander function with peak limiter per stereo channel as well as additional stereo imager and stereo delay for delay line applications Unique VPQ (Virtual Paragraphic EQ) option allows parametric control of graphic EQs Ultra high-resolution 61-band realtime FFT analyzer with additional auto EQ function for room and loudspeaker equalization Multi-functional level meters (peak/RMS, VU and SPL meter with dBA/dBC weighting via RTA mic input) 64 user memories for complete setups and/or individual module configurations Separate RTA mic/line input with phantom power, professional wordclock input and MIDI connections for full remote control, preset dumps and system updates Ultra high-quality AKM 24-bit/96kHz A/D and D/A converters (113dB dynamic range) Open architecture allowing future software updates via MIDI 2 high-performance 32/40-bit floating-point SHARC digital signal processors for ultimate sonic resolution Balanced inputs and servo-balanced outputs with gold-plated XLR connectors, stereo aux output, AES/EBU and S/PDIF inputs and outputs (XLR and optical) Internal switch-mode power supply for maximum flexi

Click here to buy

More info: Behringer DEQ2496 Ultra-Curve Pro

With its slim, 2RU rackmount design and full complement of advanced features, the DN-X050 sets a new performance standard for both flexibility and ease-of-use in professional 2-channel. Users have access to two switchable phone/line and two line inputs, as well as a dedicated microphone input. The unit also features three-band Parametric EQ, Balanced & Unbalanced Output, and a 10-segments Level Meter. The DN-X050 is scheduled to ship in March 2008 Slim 2RU Rackmount design (2) Line, (2)Phono/Line (switchable) 1 Mic Input 3 Band EQ (line) 45mm Crossfader & Channel Faders TRS Balanced & RCA Unbalanced Outputs 10 segments Level Meter Cue Monitor (line) Wall Type Power Adaptor Simple & Easy operation Denon announces the new DN-X050 Mixer, a simple and easy operational 2-channel mixer that will fit in home or small studios. The Denon DN-X050 Mixer features 2 channels, 3-band EQ, gain control and 1 fader per channel, master level and balance controls, 1 crossfader, LED segment level meter and phono/line and line input switch per channel, 4 line, 2 phono and 1 mic inputs and 2 line (balanced RCA and unbalanced 1/4???????????????) and 1 headphones (with pan and level controls) outputs.

Click here to buy

More info: Denon 19 inch Single Space 2 Channel DJ Mixer

2-input / 6-output Digital Loudspeaker Management processor The DS26 loudspeaker management system features 2 inputs and 6 outputs, and has a 5 band parametric equalizer for each output. Outputs all feature crossover filters, 5 band parametric equalizer, selectable high and low shelving filters, fully featured limiter and delay. Full metering is provided for inputs and outputs, with mute and access buttons allowing quick set up and gain adjustment. Other features included a choice of 12, 18 or 24dB/Octave roll-off, and Butterworth, Bessel or Linkwitz-Riley responses. Independent control of each high and low pass filter allows asymmetric crossover bands to be created. The DS26 can also be controlled from a PC via the DS24’s RS232 connection. Along with XLR input/output connectors, DS26 comes complete with selectable line voltages between 90 and 250 VAC operations. Specifications: 24-bit AD/DA, 48k sampling rate Internal 32-bit DSP processing Parametric EQ provides -40dB to +6dB of gain with frequency gain and bandwidth adjustment Full limiter for each output 7ms delay per output RS-232 Computer control 5 year warranty

Click here to buy

More info: BBE DS26 2In/6Out Digital Crossover/Spkr Processor

2-input / 4-output Digital Loudspeaker Management processor The DS24 loudspeaker management system features 2 inputs and 4 outputs, and has a 5 band parametric equalizer for each output. Other features included on the DS24’s output section include a high performance limiter, provided with complete control over attack, release and threshold parameters, variable high and low pass filters, with a choice of 12, 18 or 24dB/Octave roll-off, and Butterworth, Bessel or Linkwitz-Riley responses. Independent control of each high and low pass filter allows asymmetric crossover bands to be created. The DS24 can also be controlled from a PC via the DS24’s RS232 connection. Along with XLR input/output connectors, DS24 comes complete with selectable line voltages between 90 and 250 VAC operations. Specifications: 24-bit AD/DA, 48k sampling rate Internal 32-bit DSP processing Parametric EQ provides -40dB to +6dB of gain with frequency,gain and bandwidth adjustment Full limiter for each output 7ms delay per output RS-232 Computer control 5 year warranty

Click here to buy

More info: BBE DS24 2In/4Out Digital Crossover/Spkr Processor

BEHRINGER DSP-1124P: Feedback Destroyer Pro The DSP-1124P locates feedback frequencies in your system immediately and sets extremely narrow notch filters to destroy them, leaving the remainder of the signal virtually untouched. Features: Auto mode continuously monitors the mix, resetting filters automatically as required. Single-Shot mode automatically searches and attenuates feedback frequencies and locks the filter until manually reset. Usable as a 2-channel feedback suppressor or 2 x 12-band parametric EQ . Independent or coupled functions on left and right channels . 3 filter modes, selectable per filter. Extensive MIDI implementation.

Click here to buy

More info: Behringer DSP1124P Feedback Destroyer And More

DBX DRIVERACK260 Complete Equalization & Loudspeaker Control System There is a reason that Tour Sound Professionals and discriminating Audio Contractors choose dbx? DriveRack? products for their high-end tours and installs. The DriveRack products provide the tools that ensure that the system sounds its very best. With the introduction of the new 260, the heritage of unrivaled system/loudspeaker control continues. The 260 capitalizes on the road tested and contractor approved nature of the other products in the DriveRack line. The 260 provides full bandpass and crossover configurations as well as independent output processing and a full time RTA for live sound applications. Contractors will appreciate its control inputs for wall-panel logic control and the patent-pending Advanced Feedback Suppression (AFS?). The DriveRack 260 continues the legacy of DriveRack series, which has been created by the company that has been redefining the standard of signal processing for more than 30 years. The DriveRack 260 was designed with the purpose and vision of providing state-of-the-art signal processing, while utilizing a simple and intuitive user interface. This goal has been achieved by offering two independent channels of processing power with a linkable 28-Band Graphic Equalizer, industry-standard dbx stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input, with a six channel output system that includes parametric EQs, PeakStopPlus? limiters (to provide protection against speaker blowouts) and alignment delay. These features combined with the Wizard setup system and complete DriveWare? GUI control represent a methodical design that is guaranteed to deliver optimal, all-inclusive processing in a completely scalable system. Features: Feedback Elimination 2.7 Seconds of Alignment and Zone Delay RS-232 PC GUI control Classic dbx Compression and Limiting Graphic and Parametric EQ Auto-EQ Function Full Bandpass, Crossover, and Routing Configurations Auto Gain Control Pink Noise Generator and fulltime RTA Setup Wizard with JBL speaker and Crown Power Amplifier Tunings Security Lockout Wall Panel Control Inputs Analog Inputs: (2) Female XLR line inputs. XLR RTA Mic input Analog Outputs: 6 Male XLR

Click here to buy

More info: Dbx PA Eq Speaker Control/Crossover

PRESONUS EUREKA: Professional Channel Strip And Class A Mic Pre The PreSonus Eureka is a professional recording channel strip containing a discrete class A transformer-coupled microphone preamplifier, compressor and 3-band parametric equalizer. The microphone preamplifier features variable input impedance so that the Eureka can be matched and “tuned” for all types of microphones and recording applications. The Class A transformer-coupled microphone preamplifier also features “SATURATE” which adjusts the drain current on the input FET amplifier to simulate of the effects of tape saturation and tube “warmth.” The Eureka’s ultra fast compressor has both soft and hard knee compression as well as a separate make up gain stage and hi-pass side chain compression to deliver hard pumping to ultra transparent compression and everything in between. The Eureka’s three-band fully parametric EQ gives you variable Q (bandwidth) on each band as well as an EQ pre COMP switch to put the EQ before the compressor in the signal path. The equalizer has overlapping frequency selection on each band for total tonal control and shaping. The Eureka is loaded with microphone, line and instrument inputs so you can use it as a front end preamplifier for recording with microphones, guitars, keyboards and synths, as well as a compressor/equalizer on a single channel during mixdown. The Eureka also has balanced send and return jacks so that you can insert your favorite outboard processor before the compressor/EQ to further enhance and customize your sound. An optional 24-bit/192kHz digital output card (AD192) is available for the Eureka to further optimize sonic performance. The Eureka’s AD192 digital output card is loaded with both SPDIF?and AES/EBU outputs, word clock I/O as well as a balanced TRS line input so that only one output card is necessary when using two Eureka’s in stereo or dual mono situations. The Eureka gives you the sonic performance and control you need in the real-world to produce professional quality audio that you, your customers and your fans deserve! Features: Class A high headroom transformer coupled microphone preamplifier Variable microphone input impedance Variable SATURATE control (simulates tape saturation and tube warmth) Fully variable compressor with hi-pass side chain 3-band fully parametric equalizer EQ pre or post compressor High headroom output section Very low noise design Internal power supply Transparent, wide range performance Optional 24-bit/192k digital output card (AD192)

Click here to buy

More info: Presonus EUREKA 1-Channel Preamp/Compressor/Eq

The 400 PRO is a truly professional grade combo. For bassists looking for a high-powered, hi-fi, versatile amplifier that is incredible sounding, easy to use and portable ??????? the 400 PRO delivers! The 400 PRO pushes 350 watts at 4 Ohms (500 watts at 2 Ohms) out of two 10 Fender Special Design Eminence cast frame speakers. Other features include a Five-band EQ (including a Three-band Semi-parametric EQ with Gain control and On/Off switch), and an adjustable Compressor. It also has a Room Balance control (which compensates for extreme acoustics), an Enhance switch that emphasizes highs and lows, and a balanced XLR line out with a Pre/Post EQ switch. Features: Type Solid State Bass Amplifier Combo Output 350 Watts @ 4 ohms, 500 Watts @ 2 ohms Ohms 4 ohms Internal (2 ohms Minimum) Speakers 2-10″ Fender Special Design Cast Frame Eminence 8 ohm, 175 watt Speakers 1- Foster Horn Channels 1 Channel Controls and More: Extension Speaker Jack, Cast Frame Eminence Speakers, Active/Passive Input Switch, 3 Band Semi-Parametric EQ, EQ Gain, EQ On/Off Switch (Footswitchable), “Room Balance” (Compensates for Extreme Acoustics), Enhance Switch (Emphasizes Highs and Lows), Variable Compressor, Balanced XLR Line Out jack for recording or PA Feed, Ground Lift for Line Out, Line Out Level, Pre/Post EQ Switch on Line Out, Mute Switch (Disables All Outputs Except Tuner), Tuner Output, Effects Loop, 1-Button Footswitch for EQ In/Out, Fan Cooled, Spring-Loaded Handles, Oversized Plastic Stacking Corners, Heavy Duty Removable Casters Front Panel: Active/Passive Switch, Gain, Pre-amp Clip LED, Pre-amp Signal LED, Room Balance, Enhance Switch, Bass Level, Treble Level, 3-Band Semi-Parametric EQ: Low Level (Boost/Cut), Low Frequency (Frequency Select), Mid Level (Boost/Cut), Mid Frequency (Frequency Select), High Level (Boost/Cut), High Frequency (Frequency Select), EQ Gain, EQ On/Off Switch, EQ LED, Variable Level Compressor, Mute Switch, Mute LED, Master Volume, Power-amp Clip LED, Power On LED, Rear Panel: Ground Lift Switch, XLR Line Out, Line Out Level, Pre/Post EQ Switch, Tuner Out Jack, Footswitch Jack, Effects Loop Horn Level (Attenuator) Covering Rugged Black Carpet Covering with Anodized Aluminum Faceplate and Black Steel Grille Weight 80 lbs. (36.3 kg) Dimensions Height: 24.75″ (62.9 cm), Width: 23″ (58.4 cm), Depth: 17″ (43.2 cm) Power Handling 800 Watts (Program), 400 Watts (Continous)

Click here to buy

More info: Fender 400 PRO Bass Combo Amplifier

ALESIS MasteLink ML9600 Hard Disc Recorder: A Complete Mastering House In A Box .The Alesis MasterLink ML-9600 is a state-of-the-art 2-track hard disc recorder and a do-it-yourself mixing and mastering system. Only MasterLink lets you capture your mixes with stunning 24-bit/96kHz resolution, then edit your recording and apply finishing tools - such as high-resolution parametric EQ Compression, limiting and normalizing - all in the same system. They you can burn the finished recording in either industry-standard Redbook or new high resolution CD24. CD24 is fast becoming the new standard for archiving and transferring high-resolution audio files to the mastering room.. .. .Alesis has also upped the performance power of the ML-9600 with a new, improved and expanded 20GB hard disk which affords nearly 20 hours of continuous recording time. No other rackmount product in the world (including CD burners, DATs, computers, etc.) can do this … NONE!. Features: Huge 20GB internal hard disk for nearly 20 hours of continuous recording. Burn CDs using standard “Red Book” (16-bit/44.1kHz) and high resolution formats up 24-bit/96kHz. Choose any combination of digital resolutions (16, 20 and 24-bit) and sample rates (44.1, 48, 88.2 and 96kHz) with full AIFF compatibility. Organize song playlists with total control of fade-ins, fade-outs, track gain, start points, track cropping and more. Stores 16 different playlists containing up to 99 songs each. Onboard digital signal processing: compression, EQ, limiting and normalization. Uses inexpensive, readily available CDRs. Frequency response: 20Hz-20kHz, 0, -0.3 dB. THD N: Signal-to-Nnoise ratio: 113dB, A-weighted. Analog/digital converter: 24-bit 128x oversampling. Digital/analog converter: 24-bit 128x oversampling. Sample rates: 44.1, 48, 88.2, 96kHz. Word lengths: 16, 20, 24-bit. CD drive type: ATAPI CD-ROM (8x read, 4x write). CD read/write formats: Redbook, CD24. Hard disk type: high capacity IDE drive. Hard disk max recording times: 1800 minutes @ 44.1kHz/16-bit; 450 minutes @ 96.0kHz/24-bit. Digital inputs and outputs: AES/EBU-compatible balanced XLR connectors, S/PDIF-compatible unbalanced coaxial (RCA) connectors. Analog inputs and outputs: balanced XLR connectors ( 4dBu), unbalanced phono (RCA) connectors (-10dBV). Nominal input and output level: balanced: 4dBu (-15dBFS), unbalanced: -10dBV (-15dBFS). Maximum output: balanced: 19dBu = 0dBFS, unbalanced: 5dBV = 0dBFS. Input impedance: balanced: 15k ohm nominal, unbalanced: 10k ohm nominal. Output impedance: Balanced: 75 ohm nominal, unbalanced: 150 ohm nominal. Size: 19″w x 3.5″h x 11″d. Wt. 16.55 lbs..

Click here to buy

More info: Alesis Ml9600 CD Recorder W/Hard Drive

Equipped with the most authentic and expressive multi-sampled grands to ever adorn a stage piano, the RD-700SX represents the pinnacle of digital stage-piano design and performance. Driven by Roland’s most powerful sound engine, the RD-700SX enables the ultimate in sound and performance with two world-class grand piano waveforms at its core, and featuring 128-voice polyphonic performance, a Progressive Hammer-Action keyboard, and an expanded soundset (which includes brilliant electric pianos, authentic virtual tonewheel organs, and more). The RD-700SX is an unrivaled new breed of stage piano. Features • Two great new grand piano sample-sets, each with 88-key multisamples • Roland’s most expressive Progressive Hammer-Action Keyboard • 128-voice polyphony • 3-band parametric EQ with graphical user interface and COSM effects for easy tone shaping • Realistic tonewheel organ sounds with graphic drawbar editing • XLR Outputs for professional use • Master Keyboard functions with two individual MIDI out for controlling external MIDI modules • Built-in SMF player with USB connection for PC/Mac • 2 SRX Expansion slots for adding great new sounds • Complete GM2-compatible sound engine onboard • Micro Tune Edit function allows micro-tuning of each individual key

Click here to buy

More info: Roland RD-700SX 88-Key Hammer Action Digital Piano